RECD Cleaning Service Quotes: What Should Be Included?

Three cleaning quotes arrive in the same week. One is for ₹14,000 and says “RECD filter cleaning, same day”. One is for ₹26,500 and runs to two pages with a flow-test report and a three-month guarantee. One is for ₹41,000 and includes an exchange element. The cheapest is not obviously worse, the dearest is not obviously better and nobody in the room can say why the numbers are so far apart.

The reason is that the three quotes are not for the same job. A price is only meaningful against a defined scope, and many quotations leave the scope vague on purpose or by habit. The result is a comparison of unlike things.

This article shows how to read an RECD cleaning service quote properly. We break a complete quote into five zones, list the line items that belong in each, point out the exclusions that most often surprise buyers, translate the phrases that appear in quotations and then normalise the three quotes above into a landed cost, with a sensitivity case showing how the winner changes. A copy-ready request-for-quotation email and a scoring sheet follow, so that your next set of quotes arrives in a form you can compare.

A note on prices. We do not give market rates, because reliable public prices for cleaning a DG-mounted RECD element in India are scarce and vary by size, method and location. All amounts below are illustrative. Use them to learn the method and replace them with your own quotes.

Why quotes do not compare

Four things cause most of the mismatch.

Different jobs under the same name. “Cleaning” can mean a surface vacuum and a visual check, a controlled air process, a thermal bake plus an air stage or a wet process. Our article on on-site and off-site RECD filter cleaning separates the tasks, and it matters here because each task has a different cost.

Different proof. One provider flow-tests and weighs the element before and after. Another takes photographs. A trade article quoting a truck-parts manufacturer argued that testing after cleaning is the most critical part of the process, because without it nobody can say whether the filter is clean enough to go back into service (FleetOwner). A quote that includes testing contains a cost that a quote without it does not.

Different scope of “included”. A consumer guide to DPF cleaning prices notes that most quotes include the cleaning, labour and basic diagnostics, but usually exclude replacement sensors or parts, off-vehicle removal unless stated and tax (Checkatrade). The same patterns show up in commercial quotations.

Different risk allocation. Who pays if the element is cracked on arrival, fails the test, is damaged in transit or clogs again soon after refit? The answer is often missing from the quote and appears only when something goes wrong.

The five zones of a complete quote

Think of a good quote as five zones, each answering a question. A quote that leaves a zone blank is not wrong, but you should know what you are not being told.

ZoneThe question it answersWhat should be there
1. ScopeWhat exactly will you do?Method and stages, element identification, what is removed and what is not
2. ProofHow will I know it worked?Before and after tests, weights, reference, acceptance limit, report contents
3. LogisticsHow does it get there and back, and how long does it take?Pick-up and delivery, packing, turnaround in days, exchange availability
4. RiskWhat happens if something goes wrong?Rejection handling, damage responsibility, re-clean terms, guarantee
5. CommercialWhat do I pay and when?Price basis, taxes, validity, payment, waste handling, cancellation

Zone 1: Scope

Look for these items. If they are absent, ask.

Line itemWhy it mattersWarning sign
Element identification (model, serial, batch)Ties the work to your asset“RECD filter” with no identification
Method and stages, in orderYou can judge whether the method suits your element“Our standard process”
Intake inspection, with photographs and any pin or visual checksFinds cracks, melting and oil soaking before money is spent“Inspection” with nothing recorded
Treatment of oily or wet elementsA different process may be neededNo mention of deposit type
Approval by the supplier for the methodProtects the warranty; see RECD warranty termsSilence
What is cleaned alongside (catalyst section, housing, sensor ports)Some contractors clean related parts only if asked; a truck dealer’s guidance suggests inspecting and cleaning an associated catalyst whenever the filter comes out (Rush Truck Centers)Related parts not mentioned
Threads and gasket faces checkedA cleaning shop that checks sensor-port threads and mounting surfaces saves a leaking refitNot mentioned

The methods themselves are explained in separate guides: washing, compressed air, thermal cleaning and ultrasonic cleaning.

Zone 2: Proof

Proof is the zone where cheap quotes are usually thinnest. A complete quote says:

  • Before and after measurements, of pressure drop or airflow under stated conditions, and of weight
  • The reference value, and where it comes from
  • The acceptance limit, as a number, not “to our satisfaction”
  • The report format, with a sample, and how soon it arrives
  • Photographs, before and after, of both faces
  • Instrument calibration, at least a statement of date and traceability; see RECD test instrument calibration records

A service-company guide for one family of truck filters advises asking for a dated data sheet that summarises the before and after condition (Fleet Maintenance). The same advice applies to a DG-mounted element. Our article on how to verify that an RECD cleaning service was effective shows how to audit what you receive. If the quote offers no proof, price it as an inspection and a hope.

Zone 3: Logistics

Line itemWhat to look for
Removal and refit labourIncluded, or a separate site-visit charge? A consumer guide notes that off-vehicle cleaning often involves a separate labour line
Pick-up and deliveryOne way or both? Insured? Who packs? See packaging an ash-loaded RECD filter for off-site cleaning
TurnaroundStated in days from receipt, and from removal; typical delays are queueing, drying and transport
Exchange elementAvailable? Its history and test record; see refurbished RECD filter core reuse
Return packingPhotographs of the sealed pack, tamper seals
Mobile or on-site workEquipment, dust control, power and space the provider needs from you

Exchange or return-your-own? An exchange element shortens downtime, and a trade article on the exchange route notes that owners send in dirty filters and receive already-cleaned ones, which reduces stock but means the owner does not know where the replacement has been (Trucking Info). That is the trade-off: speed and continuity against a known history. A full replacement can cost several times a cleaning; one fleet source puts a remanufactured filter at about three times the cost of a cleaning (Trucking Info). If you are choosing between cleaning and replacing the core, see filter core versus complete assembly replacement.

Zone 4: Risk

This zone decides who carries the cost when things go wrong. Look for each of these.

Rejection handling. Not every element can be cleaned. A cracked, melted or oil-soaked core may be a reject. Some providers charge a handling fee when a cleaning is unsuccessful. One published fleet price menu, for instance, waives its cleaning charges if it cannot recover the filter and applies only a small flat handling charge (Allegiance Trucks). That is a clear policy. A silent quote is not. Our guide to when a cleaning provider should reject an RECD filter explains the fair triage.

Damage responsibility. Damage in handling, in the workshop and in transit. Who pays, and up to what value?

Re-clean terms. If the element fails the acceptance test, is a re-clean free? How many attempts? What if it passes on the bench but pressure rises soon after refit?

Guarantee. A trade article quoting a company that supplies exchange filters suggests asking whether the facility will stand behind the work if the unit clogs after six months (Overdrive). A guarantee needs a duration, a trigger (for example, pressure at the reference load above an agreed value) and a remedy. “Guaranteed results” with no terms is a slogan.

Warranty interaction. Does the provider confirm the method is acceptable to your supplier? See RECD warranty terms: parts, labour and exclusions.

Zone 5: Commercial

Line itemCheck
Price basisPer element, per visit, per kVA band or per hour? Is it fixed?
TaxesGST included or extra?
Waste handlingIncluded? Named destination and a record? See RECD ash collection containers: labelling and temporary storage
ConsumablesNew gaskets, seals, clamps: included or at cost?
SensorsReplacement sensors or lines excluded unless stated
ValidityHow long the price holds
Payment termsMilestones, retention, advance; see RECD payment milestones
Cancellation and reschedulingFees for a missed slot
Contact and escalationNamed person and response times; see RECD service response commitments

A phrase decoder

What the quote saysWhat it may meanWhat to ask
“Cleaning included”Some cleaning, of unstated depthWhich stages? Tested how?
“Flow tested”A test existsBefore and after? Reference? Limit? Report?
“Up to 95% restoration”A best caseFormula, baseline, sample size; see ultrasonic cleaning claims
“Subject to inspection”The price may change after intakeWhat changes the price? Who approves?
“Free pick-up”Transport is in the priceBoth ways? Insured? Return packing?
“Same day”A short job on siteWhich of the five tasks is included?
“Guaranteed”Some promiseDuration, trigger, remedy
“As per standard process”UnspecifiedSend the written procedure
“Extra charges as applicable”Open-endedList them now

Landed-cost normalisation: three quotes, one table

Return to the three quotes. All numbers are illustrative assumptions.

Quote A: ₹14,000, on-site same-day vacuum and visual cleaning, GST extra, no test, waste left with the site. Quote B: ₹26,500, off-site cleaning with flow test, weight and report, pick-up and delivery included, waste included, GST extra, five-day turnaround, three-month guarantee with a free re-clean. Quote C: ₹41,000, off-site cleaning with flow test, weight and report, an exchange element swapped on the day, GST extra, waste and transport included.

Assumptions for the comparison.

  • GST at 18% on all three
  • Waste handling cost to you for Quote A: ₹2,500
  • Cost of temporary cover while the set is without an RECD: ₹12,000 per day
  • Downtime: A, one day; B, five days; C, half a day for the swap
  • Quote A is not proven to remove channel ash, so assume a 70% chance that a full cleaning (Quote C) will be needed afterwards
  • Quote B has a 10% chance of a re-clean, which is free but costs another five days of cover
  • Quote C has a 5% chance of a second swap, costing half a day of cover

The arithmetic, with cover cost of ₹12,000 per day.

ItemABC
Quoted price14,00026,50041,000
GST at 18%2,5204,7707,380
Waste handling2,50000
Cover during downtime12,000 (1 day)60,000 (5 days)6,000 (half a day)
Expected follow-on0.70 × 54,680 = 38,2760.10 × 60,000 = 6,0000.05 × 6,000 = 300
Expected landed cost69,29697,27054,680

Check each total. A: 14,000 + 2,520 + 2,500 + 12,000 + 38,276 = 69,296. B: 26,500 + 4,770 + 60,000 + 6,000 = 97,270. C: 41,000 + 7,380 + 6,000 + 300 = 54,680. (The ₹54,680 used for A’s follow-on is C’s own landed cost.)

The result. With a high cost of cover, the most expensive quote becomes the cheapest, and the apparently middle-priced one becomes the dearest, because five days of cover swamps the price difference. The cheapest-looking quote costs more than twice what you expected once the probable follow-on is included.

The sensitivity case: no cover cost. Suppose the set is not critical and a week without it costs nothing.

ItemABC
Quoted price plus GST16,52031,27048,380
Waste handling2,50000
Expected follow-on0.70 × 48,380 = 33,86600
Expected landed cost52,88631,27048,380

Now Quote B wins comfortably, and Quote C’s exchange premium buys nothing you need. The same three quotes produce two different winners, depending on one input you control: what an outage costs you. That is the point of the exercise. A quote comparison is really a comparison of assumptions, and the assumptions should be yours.

Our article on tracking RECD service cost per operating hour shows how to keep the numbers for later comparison, and the shared spare RECD for a generator fleet shows how a spare can change the cover cost.

A scoring sheet for the non-price factors

Some factors do not reduce to rupees. Score them from 0 to 2 and keep the sheet with your decision note.

Factor012
Method suits my element and has supplier approvalUnknownLikelyDocumented
Before and after measurementNonePhotographs onlyFlow test and weight, with limits
Reference value and acceptance limitNoneStated vaguelyStated as numbers
ReportNoneSummaryFull, with raw data
Guarantee with termsNoneSloganDuration, trigger and remedy
Waste handling recordNoneVerbalNamed destination and record
Damage responsibility statedNoPartlyFully
Turnaround stated in daysNoVagueCommitted
References from similar sitesNoneOfferedChecked

A total of 14 or more out of 18 is a strong quote. Below 9, it needs clarification before it can be compared with anything. Add the score to the landed-cost table and use both in your internal approval note; see writing an internal approval note for an RECD purchase for a structure.

An RFQ email you can copy

Sending the same request to each provider makes the replies comparable. Adapt the bracketed parts.

Subject: Request for quotation: filter element cleaning, [site], DG-[number]

Dear [name],

We are planning to clean the filter element of an RECD fitted to a [kVA] DG set at [site]. Please quote against the following.

Element: [RECD model, serial, element ID]. Run hours since installation [x]; since last cleaning [y or unknown]. Pressure at reference load [now] against [baseline]. Photographs attached.

Please state: (1) method and stages in order, and whether the supplier approves them for this element; (2) tests before and after, instrument, reference value and acceptance limit; (3) what the report will contain, with a sample; (4) removal, packing and transport arrangements, who bears transit risk and the turnaround in days from removal; (5) whether an exchange element is available, with its test record; (6) what happens if the element is rejected, fails the test or is damaged, and any charges; (7) re-clean and guarantee terms, with duration, trigger and remedy; (8) waste handling and the record we will receive; (9) items excluded from the price, including sensors, gaskets and taxes; (10) validity of the quotation.

Please give the price as one all-in figure per element and list any items that could change it.

Kind regards,

[name, role, phone]

For larger projects, borrow the structure in how to write a technical RFQ for an RECD project.

Negotiating without losing the proof

If a quote is close but not perfect, negotiate in this order.

  1. Protect the proof. Testing and reporting are the last things to trade away.
  2. Trade logistics. Consolidating several elements into one pick-up, or scheduling to the provider’s quiet period, can lower cost without weakening the job.
  3. Ask for terms, not discounts. A guarantee clause or a faster response commitment is often cheaper for the provider to give than a price cut, and it is worth more to you.
  4. Bundle carefully. If you hold a service contract, see how to negotiate an AMC contract for your generator and third-party service companies maintaining an RECD for ways to fold cleaning into a broader agreement.
  5. Avoid prepaying for work you cannot verify. Link payment to delivery of the report and the acceptance test.

Mistakes to avoid

  • Comparing price lines instead of scopes.
  • Ignoring the cost of downtime. In the worked example it was the largest line.
  • Accepting “subject to inspection” without a price schedule for the likely outcomes.
  • Forgetting taxes, waste and consumables.
  • Assuming a guarantee exists because the brochure uses the word.
  • Choosing an exchange without seeing the element’s history.
  • Not asking about rejection. The first time you hear about it should not be after the element has travelled.
  • Treating the cheapest quote as the baseline and the others as premiums, when it may be the odd one out.

Frequently asked questions

What should an RECD cleaning quote include at minimum?

A named method and stages, element identification, before and after tests and weights with a stated acceptance limit, a report, transport and turnaround terms, rejection and re-clean terms, a guarantee with a duration and trigger, waste handling and a clear statement of exclusions and taxes.

Is cleaning cheaper than replacing the filter element?

Usually, per event, yes. A fleet source cited above puts a remanufactured filter at about three times the cost of a cleaning, though your figures will differ. The better comparison is cost over the element’s life, including the effect of repeated cleaning; see filter core versus complete assembly replacement.

Why do some providers charge when a cleaning fails?

Because intake inspection, handling and attempted cleaning cost them time even when the element cannot be recovered. A defined, small handling fee with a clear rejection policy is reasonable. An undefined one is a risk.

Should I pay for an exchange element?

If a day of cover costs you more than the exchange premium, yes. If an outage costs little, probably not. Use the landed-cost method above with your own cover cost.

How many quotes should I collect?

Three is a good number if each is given the same RFQ. Fewer leaves you without a reference point, and more makes comparison tiresome.

Do I need a contract for a one-off cleaning?

At least a purchase order that incorporates the quote, the acceptance criteria and the risk terms. For a recurring service, a framework agreement is worth considering.

Where to go from here

A good RECD cleaning quote answers five questions: what will you do, how will I know it worked, how does it get there and back, what happens if it goes wrong and what do I pay. Compare quotes by landed cost with your own cover cost, score the non-price factors and send every provider the same RFQ so that the answers line up.

If you would like help reviewing a cleaning quotation, browse our retrofit emission control devices, read our DG set emission regulations overview or contact the Aceget team.

Keep reading



Leave a Reply